Morse-Code   |     home
Edrum Housing   |   E-Drum Digital PCB   |   Switch & Analog Mux PCB   |   Analog 1 PCB   |   Analog 2 PCB   |   Edrum PSU   |   Edrum Assembly   |   Drum Head / Triggers   |   Edrum Potentiometer Pedal   |   Edrum Optical Hi-Hat Pedal   |   DIY Edrum Drum Rack   |   Drum Brackets and Cymbal Mounts   |   DIY Edrum Cymbals
Analog 1 PCB
This is the first of 2 Analog interface boards I had to fabricate for this project. These boards basically consist of a couple LM324 Op amps and a handfull of pasive components.....

Once everything was checked for shorts on the traces and all holes are drilled, I usually layout the parts on the PCB with a marker, since I do not use any type of silk screening for the PCB, this makes it easy for me to place all the components in the right place.

Here it is installed in the housing and ready to be wired up to the 1/4" phono jacks.

Back to Edrum Main Page

Back To Projects Page