Morse-Code   |     home
Edrum Housing   |   E-Drum Digital PCB   |   Switch & Analog Mux PCB   |   Analog 1 PCB   |   Analog 2 PCB   |   Edrum PSU   |   Edrum Assembly   |   Drum Head / Triggers   |   Edrum Potentiometer Pedal   |   Edrum Optical Hi-Hat Pedal   |   DIY Edrum Drum Rack   |   Drum Brackets and Cymbal Mounts   |   DIY Edrum Cymbals
E-Drum Digital PCB
12/20/2009
As usual I drew up the circuit in Eagle Lite, used the pcb-gcode.ulp to produce the milling files and milled the PCB with my home made CNC PCB mill/drill. I ended up using some 1/32" thick FR4 copper clad boards for the whole project......



Here it is all milled and drilled, ready for components to be placed and soldered....


Here is the top side of the Digital PCB

I downloaded the latest version of the firmware for the controller from the Edrum site, programmed the PIC16F877A with the pickit 2 via ICSP, and walla!! It works so far!

Here you can see the VU meters for each channel....
Now on to the Analog boards, can't do anything with this PCB without those!

Back to Edrum Main Page

Back To Projects Page